Port forwarding for Vsol GPON

1 To establish the connection successfully, it is necessary to generate a script. To generate it, we go to our OLT and select the edit option.

Once in the edit section, we go to the "Connection Script" tab.

2 Here we will enter our private IP and select the option Generate Script. Next, we will see that a script is provided to us.

Private IP OLT

You must enter the private IP of the OLT. For this example, the RB must be able to ping the OLT.

3 This script must be entered in our MikroTik router through Winbox.

4 After copying the script, we must go back to the "Details" tab and select the option "Save and check connection."

You will see a loading screen where you can check the status of connections such as SSH, PON port, etc.

Upon completion, you will be able to see the status of the different established connections.

Note

When checking the connection, the SNMP service may take up to 10 minutes to communicate with AdminOLT. If this is your case, please check the connection after that time.

Note

Next step is to apply initial configurations Apply Initial Configuration

April 12, 2024, 3:32 p.m. - Visitas: 11634