First Steps - adminolt.com

First Steps

Scenario 1: I have an OLT working with clients and I authorize my ONUs using the Autolearn method.

If your OLT is already working, follow these steps.

OLT Vsol operating flow in Autolearn mode with AdminOLT.

For this scenario, every time the OLT authorizes a new ONU, you must import it into the system.

1Add OLT to AdminOLT. See manual Here

  • 1.1.- Paste Connection Script (optional) for remote access. See manual Here

2Apply initial configuration. See Manual Here.

3Import ONUs from the OLT. See Manual Here.

4View Authorized ONU. See Manual Here.

Scenario 2: I have an OLT working with clients and I authorize my ONUs using the Manual method.

1Add OLT to AdminOLT. See manual Here

  • 1.1.- Paste Connection Script (optional) for remote access. See manual Here

2Apply initial configuration. See Manual Here.

3Authorize ONU. See Manual Here.

4View Authorized ONU. See Manual Here.

5Import ONUs from the OLT. See Manual Here.

Scenario 3: My OLT is new and I want to connect it to AdminOLT.

Configuration in RouterBoard MikroTik for OLT Vsol

It is necessary to have the necessary configurations to connect your OLT with AdminOLT, you can follow the steps in the manual Configuration in RouterBoard MikroTik for OLT Vsol

1 Access the OLT and create accesses. See Manual Here.

2Add OLT to AdminOLT. See manual Here

3 Connection script for remote access. See Manual Here.

4 Apply initial configuration in AdminOLT. See Manual Here.

5 Configure PON Port. See Manual Here.

6 Create VLAN in the OLT. See Manual Here.

7 Assign VLAN to UPLINK port. See Manual Here.

8 Authorize ONU. See Manual Here.

9 View Authorized ONU. See Manual Here.

10 Configure WAN. See Manual Here.

April 12, 2024, 3:32 p.m. - Visitas: 15860