Pre-authorize ONU TP-Link
Important
Please note that the PON port on the OLT must have the Auto and Adaptive modes disabled. If you have any doubts about this issue, you can refer to the following manual: Configure PON Port
What does Pre-Authorize Onu mean in AdminOLT?
It involves authorizing using the Serial Number (SN) of an ONU that is not physically connected to the OLT. This way, at the time of installation, only the equipment needs to be connected. Follow these steps to perform this action.
1Go to Onu > Pre-authorize Onu
2Select OLT
Note
It is necessary that as a first step, you select the OLT where the action will take place. When selecting an OLT, some form data will auto-populate, for example Cards, Ports, or VLANs.
3Complete the form
4Verify that the ONU has been authorized correctly.
5If you wish to check the ONU data, consult the details with the following button.
The displayed information will be:
ONU Status
ONU Information and Details
April 12, 2024, 3:32 p.m. - Visitas: 4578