Pre-authorize ONU C-Data
Important
Please note that the PON port of the OLT must have Auto and Adaptive modes disabled. If you have any doubts on this topic, you can consult the following manual; Configure PON Port
What does Pre-Authorize Onu mean in AdminOLT?
It refers to authorizing using the Serial Number (SN) of an ONU that is not physically connected to the OLT. This way, at the time of installation, only the equipment needs to be connected. To perform this action, follow the steps below.
1Go to Onu > Pre-authorize Onu
2Select OLT
Note
It is necessary that as a first step, you select the OLT where the action will be performed. When selecting an OLT, some form data will auto-complete, for example Cards, Ports, or VLANs.
3Complete the form
4Verify that the ONU has been authorized correctly.
5If you wish to verify the details of the authorized ONU, check the details with the following button.
The displayed information will be:
ONU Status
ONU Information and Details
April 12, 2024, 3:32 p.m. - Visitas: 4081