Enable UPlink Optronics port

1 In the OLT's List, select the equipment with which we will work and then go to Uplink Ports, which is located in the button labeled Tools.

2 In the Uplink Ports List, select the port with which we will work and then go to Assign/Remove Vlan, which is located in the button labeled Tools.

3 Assign the VLAN that is convenient to establish the connection.

Note

You can write a description and choose to assign or remove the VLAN.

For our example and following our initial diagram, this time we will use VLAN 200.

4 Verify that the changes have been applied correctly.

Next Step

We must apply certain configurations to our PON port so that our clients have internet. You can read the following manual Configure PON Optronics Port

April 12, 2024, 3:32 p.m. - Visitas: 3677