Enable UPlink port on Fiberhome OLT

1 In the OLT List, select the equipment we will work with and then go to Uplink Ports, which is located in the button with the label Tools.

2 In the Uplink Ports List, select the port we will work with and then go to Assign/Remove VLAN, which is located in the button with the label Tools.

3 Assign the VLAN that is convenient to establish the connection.

Note

You can write a description and choose between assigning or removing the VLAN

4 Verify that the changes have been applied correctly.

Next Step

We must apply certain configurations to our PON port so that our clients have internet, you can read the following manual Configure PON Port OLT Fiberhome

April 12, 2024, 3:32 p.m. - Visitas: 3741