Example Using Maps Version 2
Next, we will provide an example that consists of the following:
- A rack with a Huawei MA5800-X15 OLT
- 3 Splice Boxes
- Cable with 2 Buffers, totaling 24 fibers
Video Tutorial
Example Steps
1 Add Cable Type
For this, we can refer to the post Add a Cable Type , we need to add a cable type with 2 buffers and 12 fibers per buffer
2 Add Splitter Type
For this, we can refer to the post Add a Splitter Type, we need to add a splitter type with 8 ports
3 Add Rack Type
For this, we can refer to the post Add a Rack Type.
4 Add an Active Device
For this, we can refer to the post Add an Active Device, we are going to use a Huawei MA5800-X15, as shown in the example in the same section. This device has the following characteristics
| Name | Card Number or Slot | Number of Ports | Signal Type |
|---|---|---|---|
| GPON 0/2 | 2 | 16 | 1310 |
| GPON 0/4 | 4 | 8 | 1310 |
| GPON 0/11 | 11 | 16 | 1310 |
5 Edit our map with the new version
6 Add map
For more information, you can read the section Add Map
Refresh the page
7 Select Map
This step is important, for the following steps we must make sure that we have selected the map where we want the elements to be created
This is to better control our map's elements
8 Add Active Device to Map
We need to add a rack-type marker
Fill in the information
9 Add Directory for Splice Boxes
In this step, a directory will be created to separate the splice boxes
10 Add Splice Boxes to Map
For our example, we create 3 Markers of type Splice Box
| Name | Splitter Type |
|---|---|
| SPLICE-BOX-001 | 8 Ports |
| SPLICE-BOX-002 | 8 Ports |
| SPLICE-BOX-003 | 8 Ports |
Now we will create the other 2, with the information shown earlier
11 Add Directory for Cables
We can follow step 9
12 Connect our points
| Cable Name | Point A | Point B | Cable Type |
|---|---|---|---|
| CABLE-RACK-001-A-SPLICE-BOX-001 | Huawei MA5800-X15 OLT | SPLICE-BOX-001 | 24 Fiber Optic |
| CABLE-SPLICE-BOX-001-A-SPLICE-BOX-002 | SPLICE-BOX-001 | SPLICE-BOX-002 | 24 Fiber Optic |
| CABLE-SPLICE-BOX-002-A-SPLICE-BOX-003 | SPLICE-BOX-002 | SPLICE-BOX-003 | 24 Fiber Optic |
We will use the tool to create cables, once selected, we must choose the Marker A where the cable will start and the point Marker B where it will end.
A form will appear for us to add the corresponding information
Now we will create the other 2, with the information shown earlier
13 Connect Active Device (OLT) to Cable
Now, we will work on connecting the fibers. For this, we will use ports 0/2/0, 0/2/1, 0/2/2 of our OLT
To learn how to connect fibers from a rack to fibers from a cable, you can read the section Rack to NAP Union
Connect our points
We will see how they look like the following
14 Connect Splice Box Fibers
SPLICE-BOX-001
SPLICE-BOX-002
SPLICE-BOX-003
Lastly, we see how the last box looks like
April 12, 2024, 3:32 p.m. - Visitas: 4096