WAN IP VSOL EPON Configuration (AdminOLT) - adminolt.com

WAN IP VSOL EPON Configuration (AdminOLT)

 Information

The Create WAN option only works for V-SOL Brand ONU's, likewise, we have provided a table with the models that were used for testing.

OLT VSOL EPON, V2.03.54R

ONU Model STATIC DHCP PPPoE Recommended Configuration
Vsol 1GE+1FE+1POTS+CATV+WiFi Successful Successful Successful Supported
Wolck WK-3800CW Successful Successful Successful Supported
Huawei HG8546M Failed Failed Failed Not Supported
Huawei HG8326R Failed Failed Failed Not Supported
ZTE ZXHN F668 Successful Successful Failed Not Supported
CDATA FD702XW-X-R410 Successful Successful Failed Not Supported

 

AdminOLT has integrated a feature to add WAN IP configurations quickly and efficiently. By following the steps below, you will be able to learn how to configure your WAN IP and add it to the AdminOLT system.

Questions

Where to create WAN IP configurations in AdminOLT?

Steps to create Wan IP from authorized Onu's.

1Go to the section of ONU > Authorized and select the ONU you want to work with, then check the Onu Details.

 Information

For this process, it is recommended that the ONU you will work with is reset and authorized in AdminOLT. If you have doubts about how to perform this action, you can follow the instructions in the Authorize ONU manual.

2 Go to the Tools > WAN IP section.

3 List of WAN IP configurations.

There are 3 types of WAN configurations that you can create, which you can find in the following sections.

How to create a STATIC WAN IP configuration?

1 Fill out the form.

  • 1.-Type: In AdminOLT, you can create WAN IP configurations of type STATIC, DHCP, PPPoE. In this example, we will create a STATIC WAN IP.
  • 2.-Connection Name: Enter a name of your choice for your configuration.
  • 3.-Associate Ports: Associate the LAN ports of the ONU.
  • 4.-Associate SSID: Associate the SSID of the ONU.
  • 5.-Enable HTTP Port: Not functional at the moment.
  • 6.-VLAN: Select an option from a set of available VLANs.
  • 7.-Priority: Define the priority assigned to your WAN IP in a range from 1 to 7.
  • 8.-WAN Mode: The WAN mode can be ROUTE or BRIDGE.
  • 9.-Service Type: The service type will be INTERNET.
  • 10-IP Address: Enter the IP address.
  • 11.-Subnet Mask: Enter the subnet mask.
  • 12.-Gateway: Enter the gateway.
  • 13.-Primary DNS: Enter the primary DNS.
  • 14.-Secondary DNS: Enter the secondary DNS.

Upon entering the ONU interface, you can see that the WAN configuration has been created.

How to create a DHCP WAN IP configuration?

 DHCP Server

It is necessary to have a DHCP server ready. In this example, we will use a server on a MikroTik device.

1 Fill out the form.

  • 1.-Type: In AdminOLT, you can create WAN IP configurations of type STATIC, DHCP, PPPoE. In this example, we will create a DHCP WAN IP.
  • 2.-Connection Name: Enter a name of your choice for your configuration.
  • 3.-Associate Ports: Associate the LAN ports of the ONU.
  • 4.-Associate SSID: Associate the SSID of the ONU.
  • 5.-Enable HTTP Port: Not functional at the moment.
  • 6.-VLAN: Select an option from a set of available VLANs.
  • 7.-Priority: Define the priority assigned to your WAN IP in a range from 1 to 7.
  • 8.-WAN Mode: The WAN mode can be ROUTE or BRIDGE.
  • 9.-Service Type: The service type will be INTERNET.

Upon entering the ONU interface, you can see that the WAN configuration has been created.

How to create a PPPoE WAN IP configuration?

 PPPoE Server

It is necessary to have a PPPoE server ready along with your user. In this example, we will use a server on a MikroTik device.

1 Fill out the form.

  • 1.-Type: In AdminOLT, you can create WAN IP configurations of type STATIC, DHCP, PPPoE. In this example, we will create a PPPoE WAN IP.
  • 2.-Connection Name: Enter a name of your choice for your configuration.
  • 3.-Associate Ports: Associate the LAN ports of the ONU.
  • 4.-Associate SSID: Associate the SSID of the ONU.
  • 5.-Enable HTTP Port: Not functional at the moment.
  • 6.-VLAN: Select an option from a set of available VLANs.
  • 7.-Priority: Define the priority assigned to your WAN IP in a range from 1 to 7.
  • 8.-WAN Mode: The WAN mode can be ROUTE or BRIDGE.
  • 9.-Service Type: The service type will be INTERNET.
  • 10.-User: Enter your PPPoE server user.
  • 11.-Password: Enter your PPPoE server password.

Upon entering the ONU interface, you can see that the WAN configuration has been created.

How to edit a WAN IP configuration?

1 Go to the List of WAN IP of the ONU.

Then modify the information as needed.

How to delete a WAN IP configuration?

1 Go to the List of WAN IP of the ONU.

To confirm the action, press the button that says Yes, I am sure.

By doing this, the configuration will be deleted from the ONU and from the AdminOLT system.

 

April 12, 2024, 3:32 p.m. - Visitas: 29009