How to Import ONU's TP-Link Series DS-P7001 into AdminOLT

Important

Keep in mind that the PON port of the OLT must be disabled in Auto mode. If you have any doubts about this, you can consult the following manual; Configure PON Port

If your OLT is already in operation, that is to say, if you already have authorized equipment, you can load these equipment into the system through the Import ONU's to the System function, which is located in the Tools box in the OLT menu, where you can find the list of OLTs that you have connected.

1In the OLT List, we select the equipment we will be working with and then go to Import ONU's to the System, found in the button labeled Tools.

2A list of the equipment already authorized in your OLT will be displayed, so it's time to select the equipment you want to import. To select the equipment, you can do it in batches, that is, selecting several at once or one by one.

3Once we have selected the equipment, we import the ONU's to the AdminOLT system

4Confirm the process.

5Verify that the ONU's have been imported correctly.

NOTE

It is recommended to always validate the information and details of the equipment once they have been imported into the system.

April 12, 2024, 3:32 p.m. - Visitas: 5195