How to Import TP-Link ONU's to AdminOLT

Important

Keep in mind that the PON port of the OLT must have the Auto and Adaptive modes disabled. If you have any doubts about this issue, you can refer to the following manual; Configure PON Port

If your OLT is already in operation, meaning if it already has authorized equipment, you can upload these equipment to the system using the Import ONUs to System function which can be found in the Tools box under the OLT menu where you can find the list of OLTs you have connected.

1In the OLT List, select the equipment you will be working with and then go to Import ONUs to System, which is located in the button labeled Tools.

2A list of the equipment already authorized in your OLT will be displayed, so you need to select the equipment you want to import. You can select the equipment in batches, meaning you can select multiple at once or one by one.

3Once you have selected the equipment, import the ONUs to the AdminOLT system

4Confirm the process.

5Verify that the ONUs have been imported correctly.

NOTE

It is recommended to always validate the information and details of the equipment once they have been imported into the system.

April 12, 2024, 3:32 p.m. - Visitas: 5040