How to Import ONU's Hioso into AdminOLT

Important

Please note that the PON port of the OLT must have the NonAuth mode disabled. If you have any doubts on this matter, you can consult the following manual; Configure PON Port

If your OLT is already in operation, meaning if you already have authorized equipment, you can load these equipment into the system using the Import ONUs to the System function, which is located in the Tools box in the OLT menu where you can find the list of connected OLTs.

1In the OLT List, select the equipment you will be working with and then go to Import ONUs to the System, located in the button labeled Tools.

2A list of the equipment already authorized in your OLT will be displayed, so you need to select the equipment you want to import. You can select the equipment in batches, meaning, selecting several at once or one by one.

3Once you have selected the equipment, import the ONUs to the AdminOLT system

4Confirm the process.

5Verify that the ONUs have been imported correctly.

NOTE

It is recommended to always validate the information and details of the equipment once they have been imported into the system.

April 12, 2024, 3:32 p.m. - Visitas: 4678