Change ONU Vsol EPON from Port
Important
Take into account that the PON ports of the OLT you will use must have the AutoLearn mode disabled. If you have any doubts about this, you can consult the following guide; Configure PON Port
How can I change the Port of an Authorized ONU?
To edit the Port of an ONU in the OLT there are 2 ways to do it:
Example
In this example, the ONU is located in Slot 0 on Port 4; we will move it to Port 1. Before editing, verify that the ONU has service.
Edit ONU Port from Authorized ONU List
1 Go to ONU > Authorized ONU List and select the ONU you will work with.
Information
This action will take us to the following form
Edit ONU Port from ONU Details
1Go to ONU > Authorized ONU List and select the ONU you will work with.
Click on the text Edit in OLT located on the button with the label Edit.
Information
This action will take us to the following form
2Select the port to which you want to change the ONU
3Verify that the changes have been applied correctly
At this moment, if we check the status of the ONU, it is Offline because the ONU has not been physically moved to another port, but the information has been updated in AdminOLT.
4Physically change the port and verify the status of the ONU
Note
It is important to place the ONU in the correct port because if not done, the ONU will continue to show as Offline
April 12, 2024, 3:32 p.m. - Visitas: 5642