Change ONU Vsol from Puerto - adminolt.com

Change ONU Vsol from Puerto

I want you to be an expert in English translation, I am going to pass an html template and I want you to translate it into English, but do not change the classname attributes of the html elements:

 Important

Keep in mind that the PON ports of the OLT you will use must have AutoLearn mode disabled. If you have any doubts about this, you can consult the following manual; Configure PON Port

How can I change an Authorized ONU Port?

To edit the Port of an ONU in the OLT there are 2 ways to do it:

 Example

In this example, the ONU is located in Slot 0 in Port 1; we will move it to Port 4. Before editing, verify that the ONU has service

Edit ONU Port from Authorized ONU List

1 Go to ONU > Authorized ONU List and select the ONU you will work with.

 Information

This action will take us to the following form

Edit ONU Port from ONU Details

1Go to ONU > Authorized ONU List and select the ONU you will work with.

Click on the text Edit in OLT that is in the button labeled Edit.

 Information

This action will take us to the following form

2Select the port you want to move the ONU to

3Verify that the changes have been applied correctly

At this moment, if we check the status of the ONU, it is showing as Offline because physically the ONU has not been moved from the Port, but in AdminOLT the information has been updated.

4Physically move the port and verify the status of the ONU

 Note

It is important to place the ONU in the correct port because if not, the ONU will continue to show as Offline

 

April 12, 2024, 3:32 p.m. - Visitas: 7040