Change ONU Optronics Port
Important
Please note that the PON port of the OLT must have disabled the Auto mode.
How can I change the Port of an Authorized ONU?
To edit the Port of an ONU in the OLT there are 2 ways to do it:
Example
In this example the ONU is located in Port 1; we will move it to Port 7. Before editing, verify that the ONU has service
Edit ONU Port from List of Authorized ONU's
1 Go to ONU > List of Authorized ONU's and select the ONU you will work with.
Information
This action will take us to the next form
Edit ONU Port from ONU Details
1 Go to ONU > List of Authorized ONU's and select the ONU you will work with.
Click on the text Edit in OLT that is located on the button with the label Edit.
Information
This action will take us to the next form
2 Select the port you want to change the ONU to
3 Verify that the changes have been applied correctly
At this moment if we check the status of the ONU, it is Offline because the ONU has not been physically changed from Port, but in AdminOLT the information has been updated.
4 Physically change the port and verify the status of the ONU
Note
It is important to place the ONU in the correct port, as if this is not done, the ONU will continue to show as Offline
April 12, 2024, 3:32 p.m. - Visitas: 3725