Change ONU HSGQ from Port
Important
Please note that the PON port of the OLT must have Auto mode disabled.
How can I change the Port of an Authorized ONU?
To edit the Port of an ONU in the OLT there are 2 ways to do it:
Example
In this example, the ONU is located in Port 2; we will move it to Port 1. Before editing, verify that the ONU has service.
Edit ONU Port from Authorized ONU List
1 Go to ONU > Authorized ONU List and select the ONU you will work with.
Information
This action will take us to the following form
Edit ONU Port from ONU Details
1 Go to ONU > Authorized ONU List and select the ONU you will work with.
Click on the text Edit in OLT found in the button labeled Edit.
Information
This action will take us to the following form
2Select the port you want to switch the ONU to.
3 Verify that the changes have been successfully applied.
At this point, if we check the status of the ONU, it is Offline/Not found because the ONU has not been physically moved to a different port, but the information has been updated in AdminOLT.
4 Physically change the port and verify the status of the ONU.
Note
It is important to place the ONU in the correct port, as if not done, the ONU will continue to show as Offline/Not found
April 12, 2024, 3:32 p.m. - Visitas: 3339