Change Fiberhome ONU from Port
Important
Take into account that the PON port of the OLT must have the disabled NoAuth mode. If you have any doubts about this, you can consult the following manual; Configure PON Port OLT FiberHome
How can I switch an Authorized ONU's Port?
To edit the Port of an ONU in the OLT, there are 2 ways to do it:
Example
In this example, the ONU is located in Slot 2 in Port 2; we will move it to Port 3. Before editing, verify that the ONU has service
Edit ONU Port from Authorized ONU's List
1 Go to ONU > Authorized ONU's List and select the ONU you will work with.
Information
This action will take us to the next form
Edit ONU Port from ONU Details
1Go to ONU > Authorized ONU's List and select the ONU you will work with.
Click on the text Edit in OLT found in the button labeled Edit.
Information
This action will take us to the next form
2Select the port you want to switch the ONU to
3Verify that the changes have been applied correctly
At this moment, if we check the ONU status, it is shown as Offline because the ONU has not been physically moved to another Port, but in AdminOLT, the information has been updated.
4Physically switch the port and verify the ONU status
Note
It is important to place the ONU in the correct port, as if it is not done so, the ONU will continue to show as Offline
April 12, 2024, 3:32 p.m. - Visitas: 3795