Switching from Speed Plan to TP-Link ONT

Important

Keep in mind that the PON port of the OLT must have the Auto and Adaptive modes disabled. If you have any doubts about this issue, you can refer to the following manual; Configure PON Port

Note

For this example, we will use an Authorized ONU that initially has a 100 Mbps Plan, in this case, we will change it to a 25 Mbps Plan.

1 Go to ONU > Authorized ONU List and select the ONU you will work with.

2 Select the new Speed Plan

Information

It is important that you have previously added the Speed Plan in the System section > Speed Plans.
You can follow the steps in the following section Create Internet Plan

3 Verify that the changes have been applied correctly.

Note

If you need to further check if the change has been applied on the ONU, you can check the following site SpeedTest, remember that we must be connected to the ONU when measuring the speed. Example of the result:

April 12, 2024, 3:32 p.m. - Visitas: 5203