Authorize ONU Vsol
Important
Keep in mind that the PON port of the OLT must have the AutoLearn mode disabled. If you have any doubts about this issue, you can consult the following manual: Configure PON Port
When connecting a device to the OLT, it must be authorized to establish a connection. The following steps explain how to authorize ONUs in VSOL GPON OLTs from AdminOLT.
1To see the devices that have not yet been authorized, we must go to the ONU > Unauthorized section and select an available ONU.
2Complete the following form where we can assign a VLAN, set the upload and download speed, among other options for the ONU.
NOTE
We can also add additional information about the ONU, such as the address, phone, and location.
Information about WAN IP
To create a WAN IP when authorizing, it is recommended to read the following manual that discusses the topic in more depth: VSOL WAN IP Configuration
3Verify that the ONU has been authorized correctly.
4If you want to check the details of the authorized ONU, consult the details with the following button.
The information shown will be:
ONU Status
ONU Information and Details
April 12, 2024, 3:32 p.m. - Visitas: 8891